Mastodon

Vista Hotsync Success

Send to Kindle

I’ve written numerous times about the fact that Palm doesn’t support (nor intend to support!) Vista x64. I have also noted that many people claim to have success with Bluetooth Sync (and Phone-as-Modem as well).

I recently reported getting Phone-as-Modem to work over BT, but have had zero success with Hotsync over BT.

Following the instructions in this forum post, I have finally successfully sync’ed the Treo 755p with Vista x64! The technique uses a Network Hotsync, using the Sprint Network. I couldn’t test it until today when I got home and could put the correct port forwarding comnands on my router.

It worked instantly. The first sync was extremely painful (in length) because the machine correctly noticed that it was a first sync, and that the Treo had previously been syncing with another machine. In total, it took 80 minutes and drained 1/4 of the Treo battery in the process. Still, it worked with no errors or timeouts!

The second sync picked up on other things that were left out of the initial sync, and it took about 20 minutes. The third sync became a more normal sync, and took roughly two minutes (not too bad at all!).

I don’t sync all that often, so I don’t really care about the speed. Even with the cable, I was syncing roughly once a month.

This will be workable for the forseeable future even if I never get BT sync to work. The only downside is that I won’t be able to sync when traveling, because I won’t be able to control the port forwarding to the laptop. I tried doing something clever with a reverse SSH tunnel, but I think there might be some UDP packets involved, and SSH is only forwarding the TCP packets.

Either way, I’m back to being a happy camper, even if Palm didn’t help.

Also, just for the record, I am running the Sprint version of the Palm software, installed off of the Treo 755p installation CD that came with the phone. That CD claims that you need to visit Palm for an updated Vista version (which also runs on my machine). But, as I have noted before, everything seems to run fine on Vista x64, now that SP1 is out, including the Palm software that isn’t supposed to work.

Now if they only wrote a USB driver, I’d be all set!


Posted

in

, ,

by

Comments

One response to “Vista Hotsync Success”

  1. aaronasjones Avatar
    aaronasjones

    Thank you for sharing this information.
    Reverse Access Livedoor

Leave a Reply

Your email address will not be published. Required fields are marked *